The master's thesis deals with properties of aluminium alloys prepared by SLM process. The teoretical part of thesis is focused on decribtion of selective laser melting technology, metallurgical defects and mechanical properties of aluminium alloys processed by this technology. The experimental part of this thesis deals with selections of the SLM process parameters suitable for samples preparation in bulk. Tensile testing at room temperature was used for evaluation of basic mechanical properties. Metallographic and fractographic analyses were performed for evaluation of the microstructure and fracture mechanisms. The materials characteristics obtained on SLM samples were compared with the properties of the same materials grade produced by conventional technologies.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:319620 |
| Date | January 2017 |
| Creators | Vitásek, Ladislav |
| Contributors | Štěpánek, Roman, Pantělejev, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds