An Advanced Controller for a Semi-Active Wheelchair Suspension was designed, built and tested. The suspension consisted of a Goodyear 1S3-011 air spring, IQ Valves high speed proportional solenoid valve, and a custom made accumulator. Several controller designs specific to semi-active suspensions were designed and tested. The controllers investigated were skyhook, acceleration driven damping, and a combined control law employing both a dual and single sensor version. The implementation of skyhook control suffered performance degradation from the idealization due to particular elements of hardware, however acceleration driven damping showed a marked and statistically significant improvement over skyhook control, in hardware, by 14%. The combined control laws exhibited as yet unexplained transient behavior that produced results with low confidence in their veracity. All controllers proposed performed better than a conventional oil damper and spring type suspension.
| Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-1474 |
| Date | 01 January 2011 |
| Creators | Smith, David J |
| Publisher | DigitalCommons@CalPoly |
| Source Sets | California Polytechnic State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Master's Theses |
Page generated in 0.0018 seconds