Numerical simulations of thermal processes are based on known geometry, material properties, initial and boundaries conditions. The massive use of these simulations in the metallurgical industry (for example for simulation of heat treatment of steel) is limited by the knowledge of precise boundary conditions, which are not easy to determine in compare to other input parameters. Empirical formulas are not sufficiently accurate for most non-trivial processes. Therefore, it is necessary to obtain the boundary conditions by experimental way. Boundary conditions can not be measured directly. The boundary conditions are determined by solving inverse heat conduction problem based on the measured temperature records. This doctoral thesis focuses on two types of the inverse heat conduction problems, which are poorly solved by existing methods. The first type are tasks that contains sharp increase/decrease in the values of the boundary conditions. Two new approaches are proposed and compared in this thesis for this type of tasks. The second type are tasks with non-stationary and non-homogeneous cooling. Three new methods were developed for this case. They are applied for the case of water cooling of vertical aluminum sample. The base characteristics of the current task is inhomogeneous cooling. One part of the surface is cooled intensively by flowing water in contrast to the other part of surface which is cooled only with low intensity since it is protected from direct contact with water by the vapor layer (Leidenfrost effect). The positions of these two part of surface are not stationary (they change during the experiment). The newly developed methods are compared to each other.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:376778 |
| Date | January 2018 |
| Creators | Komínek, Jan |
| Contributors | Čarnogurská, Mária, Hajduk,, Daniel, Raudenský, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds