Particles and macromolecular components, including biopolymers (protein and carbohydrate), are viewed as the main foulants in the complex feed submerged membrane filtration systems such as membrane bioreactor (MBR). This work focused on two aspects of fouling in complex fluids: 1- Assessing fouling propensity and mechanisms for various model solutions. 2- Using of two specific solutions modelling biomass found in MBR for a better understanding of the fouling mechanisms in submerged MBR processes. Filtrations were carried out with 0.22 ??m PVDF hollow fibre membrane. Alginate was used as a model for polysaccharide, bovine serum albumin (BSA) as a model for protein, (un)washed yeast and bentonite were representing suspended solid contents. According to the data obtained during this study the fouling propensity of each model solution was classified as follow in a decreasing order: Alginate > unwashed yeast > washed yeast > BSA > bentonite for one-component solutions; and Alginate-washed yeast > Alginate-BSA > Alginate-bentonite > Alginate-unwashed yeast for two-component solutions. Introducing the alginate increased the reversible fouling (except BSA). Passive adsorption had a significant effect on fouling of alginate even before the beginning of the filtration. Washed yeast and a mixture of washed yeast + BSA were then used as model solutions to simulate the activated sludge found in MBR. The concentration of washed yeast and BSA used in this study were calculated in order for the characterisations of the two model solution to match (in terms of biopolymer contents) those of MBR biomasses reported in the literature. By rinsing, backwashing and chemical cleaning of the membrane, three fouling layers of upper, intermediate and lower were defined respectively. Results obtained from the analysis of the biopolymers found in the cleaning solutions allow a better understanding of the fouling mechanisms occurring for the two model solutions used in this study: for washed yeast, the lower layer and for washed yeast + BSA , the upper and intermediate layers were found to have relatively high biopolymeric composition. This was explained by higher concentration of solids on the membrane surface and by higher biopolymer interactions when washed yeast was mixed with BSA.
Identifer | oai:union.ndltd.org:ADTP/186916 |
Date | January 2007 |
Creators | Negaresh, Ebrahim, Chemical Sciences & Engineering, Faculty of Engineering, UNSW |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | http://unsworks.unsw.edu.au/copyright, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0021 seconds