The aim of this thesis is a complex design of the spotting press with a nominal force of 500 kN, which is intended for mating of the both halves of pressing tool for the automotive industry. The press ram is fitted with a hydraulic mechanism which allows the upper clamping board to be tilted in range of 0° -180° and removed from the working space of the press along a profile track. The lower clamping board is a part of moving bolster, which is equipped with a mechanism for lifting and centring. The concept of motion screws is used to drive the ram. Motion screws are mounted in a multiple-part frame and driven by servomotors. The thesis contains background research of the issue, solutions of the main design nodes of the press including calculations, detailed 3D model of the device and partial drawing documentation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:355456 |
| Creators | Švoma, Jan |
| Contributors | Tůma, Zdeněk, Omes, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds