Activated sludge systems are the most widely used biological wastewater treatment processes all over the world. The main working principles of an activated sludge system are the oxidation of biologically degradable wastes by microorganisms and the subsequent separation of the newly formed biomass from the treated effluent. Separation by settling is the most troublesome stage of an activated sludge process. A decrease in the efficiency of the separation of microbial biomass from the treated effluent causes a decrease in the overall efficiency of the treatment plant. The efficiency of the separation process is related to the bioflocculation, which can be briefly defined as the aggregation of the bacteria into flocs through flocculation. Bioflocculation depends on the extracellular polymers (EPS) that are produced by microorganisms. The operating conditions of the activated sludge system is a key determinant of the synthesis of EPS and bioflocculation. The main objective of this study is to find out the effect of magnesium ions on the bioflocculation process under phosphorus deficient and sufficient conditions. In order to achieve this aim, the effects of magnesium ion in 4 different concentrations (0.9, 5, 10 and 20 meq/L) are investigated in semi continuous reactors. The reactors are operated at a mean cell residence time of 8 days and 20º / C temperature. When reactors are confirmed to be at steady state, several sets of analysis are conducted. In particular, the surface chemical parameters including EPS and its components, electrical charge, and hydrophobicity as well as physical properties such as settlability, filterability, viscosity, floc strength, and turbidity are examined.
It has been understood that phosphorus deficiency causes severe filamentous bulking under magnesium rich conditions. Increasing the phosphorus concentration in the influent can cure this problem. After the sludges are cured some granular structures were observed in the microscopic investigations and they are thought to be polyphosphate granules in which microorganisms tend to accumulate phosphorus when they find the adequate source after a starvation period.
To consider the reactors operated at phosphate present conditions, it has been found that EPS increases with increasing influent magnesium concentration. However, protein type EPS (EPSP) exhibits a sharper increase when compared to the carbohydrate type EPS (EPSC) indicating the selective attitude of magnesium ions to protein type of polymers. It has been understood that the increase in the influent magnesium concentration results in an increase in dewaterability and zone settling velocity, and a decrease in the viscosity. Hydrophobicity was found to exhibit a maximum value at 10 meq/L magnesium fed sludge and then it dropped back. Surface charge values also made a minimum at 10 meq/L reactor and then no change occurred at the increase of the magnesium concentration to 20 meq/L. Finally, COD values were found to increase with the increasing magnesium concentration due to the increasing EPS.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/2/12606605/index.pdf |
Date | 01 September 2005 |
Creators | Turtin, Ipek |
Contributors | Sanin, Dilek Faika |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for METU campus |
Page generated in 0.0022 seconds