A full-depth precast concrete deck system presents several safety, timeline, and
cost benefits to the process of constructing a bridge, however the relevant professional
codes do not provide dependable design models due to the limited amount of research
conducted on the subject. One area lacking design direction is the development of a
shear connection between the full-depth precast deck and a precast concrete girder via a
pocket-haunch-connector system. Push-off tests are performed to investigate the effects
of various pre- and post-installed shear connectors, haunch height, surface roughness,
grouping effects, and grout composition as compared to cast-in-place specimens. The
experimental results are presented along with a method for normalizing the variations of
results by connection yield strength. This method is used to evaluate each connector
type and connection parameter investigated. Ensuring sufficient shear reinforcement
within the beam near the shear connector anchorage is found to be a vital aspect of
holistic design. A simplified design procedure is outlined, the design connection forcedisplacement
behavior is shown, and an example problem is solved. Recommendations
for additions and modifications to current code and practice are prescribed.
Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/ETD-TAMU-2009-05-306 |
Date | 2009 May 1900 |
Creators | Henley, Matthew D. |
Contributors | Mander, John B. |
Source Sets | Texas A and M University |
Language | English |
Detected Language | English |
Type | Book, Thesis, Electronic Thesis, text |
Format | application/pdf |
Page generated in 0.0155 seconds