The purpose of this master thesis has been to investigate the possibility to increase the damping capacity of shear walls with the use of glue in combination with nails. It has been done with experiment and with FE-simulations. The first experimental part is tensile tests of four different glue types which have been analyzed to get material data. The second experimental part is analysis of glued-nail joint in shear test. FE-simulations of glued-nail joints are finally done in Abaqus/CAE. The experiments in shear tests of glued-nail joints showed that two glues failed and could not be used for further analysis. The two other glues had an increase in damping capacity compared with results from nail joint. Further FE-simulations of glued-nailed joints have to be done in order to calibrate the FE-model with the results of glued-nailed joints in shear tests. The uncertainty is found in the material properties of the glue, experimental test data was not adequate. The conclusion is that glued-nail joints can increase the damping capacity in shear walls. / Damping capacity, shear wall, hysteresis, shear test, finite element method, Abaqus/CAE
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:lnu-19271 |
| Date | January 2012 |
| Creators | Karlsson, Fredrik, Ramic, Zlatan, Tartes, Karl |
| Publisher | Linnéuniversitetet, Institutionen för teknik, TEK, Linnéuniversitetet, Institutionen för teknik, TEK, Linnéuniversitetet, Institutionen för teknik, TEK |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0018 seconds