The thesis focuses on the production concept of component Cage ECR 10 12, which is used as assembly element together with a nut during the bus production. Sheet metal part is made from 11 321 steel 1,5 mm thick in production 10 000 parts per year. Technology of production in progressive tool was selected based on literature study. Progressive tool combines technology of shearing and bending. Tool was designed after the technological calculations. Forming machine was selected after the stamping force calculation. Eccentric press LEN 63 C with 630 kN forming force was selected for production.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402565 |
| Date | January 2019 |
| Creators | Jílek, Josef |
| Contributors | Heinl, Tomáš, Žák, Ladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0117 seconds