This master’s thesis focuses on the concept of large-lot manufacturing of sheet metal component made from DC01 steel. Based on forethought, the method of compound tool combining shearing and bending was chosen. The theoretical part analyses used technologies in detail. In the next part specific course of manufacture was created and supplied with technological calculations. Based on all needed facts the tool was designed and after that forming machine, LDC 160 crank press, was chosen. At the end the usability of designed concept was confirmed with economical calculations.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231054 |
Date | January 2015 |
Creators | Lipka, Ondřej |
Contributors | Lidmila, Zdeněk, Peterková, Eva |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds