A laser-driven miniflyer system is built in design similar to those at the Los Alamos National Laboratory and Eglin Air Force Base. It is composed of three parts: laser drive source, impact experiment assembly, and diagnostics. The laser drive source is a Nd:YAG laser operating at 1064nm at a maximum energy of 3 J. The impact experiment assembly consists of a BK7 substrate on to which is deposited an ablation layer consisting of carbon, alumina, and aluminum. Mounted on the ablation layer is a metal foil (flyer). The carbon in the ablation layer absorbs the laser energy to form a rapidly expanding plasma. The alumina and aluminum layers provide thermal insulation and also contain the plasma. The set-up is expected to provide flyer velocities in the range of 100 to 1000 m/s. Diagnostics consist of a Photonic Doppler Velocimetry (PDV) system that uses Doppler-shifted coherent laser light to measure the instantaneous velocity of a moving surface, as well as velocity dispersions caused by mechanical or material heterogeneities. This thesis will provide a description of the set-up of the laser-driven miniflyer system, as well as an evaluation of the flyer velocity, measured using the PDV system, as a function of laser energy. The flyer velocity trends will be used in order to characterize and calibrate the system. A manual providing system operation instructions will also be included to serve future users of this miniflyer system
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/28184 |
| Date | 08 April 2009 |
| Creators | Miller, Christopher W. |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0023 seconds