This paper is focused on MR dampers and its critical parts in term of damper`s durability, which seems to be a piston-rod seals, and it should find an ideal material combination of seal and MR fluid for increasing the damper`s life. The tests were conducted in modified pin-on-flat configuration, which was supposed to be more suitable for laboratory testing. There was tested and compared a suitable material for seals, like PTFE, NBR, SBR of polyurethanes. The article is also focused on MR fluids and its contribution to seal`s wear. The impact of particle concentration, wear of MR fluid and effect of modification of MR fluid was tested. It showed up, that the best material for seal is H-PU95FDA. The effect of particle concentration is negligible on seal`s wear, while effect of modification and wear of MR fluids are significantly higher.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443230 |
| Date | January 2021 |
| Creators | Žáček, Jiří |
| Contributors | Vimmr, Jan, Kubík, Michal |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds