This doctoral thesis deals with the issue of high power switched-mode power supplies that are designed as modular systems. The thesis describes series, parallel and series-parallel possibility of connected converters. System can achieve extremely high output current for converters connected in parallel. For converters connected in series, the system can achieve extremely high output voltage. The main goal of this thesis is to develop so-called reconfigurable modular system. It is a system that can change converters connection of serial, parallel or series-parallel connection - during its operation. This option to change converters connection significantly extends the control range of output voltage and output current of the whole system. For all these mentioned variants of the modular system there are described and simulated suitable control schemes. The issue of interleaved PWM is described in the thesis. Output voltage ripple and current ripple equations were derived for each converters connection. These equations, which were derived either for systems with interleaved PWM or for systems without of phase shifted PWM, are also proved by simulations. Design of reconfigurable modular system with power of 9.6 kW that contains four converters was introduced in this thesis. Converters use modern transistors and diodes of SiC material. The proposed reconfigurable modular system was successfully manufactured. The measurement results are also shown in the work.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234609 |
| Date | January 2016 |
| Creators | Kadlec, Josef |
| Contributors | Richter, Aleš, Mindl,, Pavel, Patočka, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0025 seconds