Multiple-input multiple-output (MIMO) technology, originated in the 1990s, is an emerging and fast growing area of communication research due to the ability to provide diversity as well as transmission degrees-of-freedom. Recent research focus on MIMO systems has shifted from the point-to-point link to the one-to-many multiuser links due to the ever increasing demand for multimedia-intensive services from users. The downlink of a multiuser transmission is called the broadcast channel (BC) and the reverse many-to-one uplink is termed the multiple access channel (MAC). Early studies in the MIMO BC and the MIMO MAC were mostly information-theoretic in nature. In particular, the characterizations of the capacity regions of the two systems were of primary concerns. The information-theoretic results suggest the optimal uplink detection scheme involves successive interference cancellation while successive application of dirty paper coding at the transmitter is optimal in the downlink channels. Over the past few years, after the full characterizations of the capacity regions, several practical precoders had been suggested to realize the benefits of MIMO multiuser transmission. However, linear precoders such as the zero-forcing (ZF) and the MMSE precoders fall short on the achievable capacity despite their simple structure. Nonlinear precoders such as the ZF dirty paper (ZF-DP) and the the MMSE generalized decision feedback equalizer-type (MMSE-GDFE) precoders demonstrated promising performance but suffered from either restriction on the number of antennas at users, i.e. ZF-DP, or high computational load for the transmit filter, i.e. MMSE-GDFE. An novice MMSE feedback precoder (MMSE-FBP) with low computational requirement was proposed and its performance was shown to come very close to the bound suggested by information theory. In this thesis, we undertake investigation of the causes of the capacity inferiority and come to the conclusion that power control is necessary in a multiuser environment. New schemes that address the power control issue are proposed and their performances are evaluated and compared. Adaptive modulation is an effective and powerful technique that can increase the spectral efficiency in a fading environment remarkably. It works by observing the channel variations and adapts the transmission power and/or rate to counteract the instabilities of the channel. This thesis extends the pioneering study of adaptive modulation on single-input single-output (8180) Gaussian channel to the MIMO BC. We explore various combinations of power and rate adaptions and observe their impact on the system performance. In particular, we present analytical and simulation results on the successiveness of adaptive modulation in maximizing multiuser spectral efficiency. Furthermore, empirical research is conducted to validate its effectiveness in optimizing the overall system reliability.
Identifer | oai:union.ndltd.org:ADTP/258368 |
Date | January 2007 |
Creators | Huang, Kuan Lun, Electrical Engineering & Telecommunications, Faculty of Engineering, UNSW |
Publisher | Awarded by:University of New South Wales. Electrical Engineering & Telecommunications |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | Copyright Huang Kuan Lun., http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0014 seconds