The aim of this thesis was to improve the understanding of microstructure in single crystal ferroelectrics. This was achieved through macroscopic testing of Lead Magnesium Niobate – Lead Titanate (PMN-PT) and microscopic observations of Barium Titanate (BT) single crystals. Multi-axial polarization rotation tests on PMN-PT showed a gradual increase in the change in dielectric displacement due to ferroelectric switching as the electric field is applied at increasing angles to the initial polarization direction. A relatively high remnant polarization for loading angle near to 90° suggested that PMN-PT is more polarizable in certain directions. Strains measured in two directions, parallel to the electric field and perpendicular to the electric field, showed a noticeable variation on two opposite faces of the specimen suggesting an effect of local domain configurations on macroscopic behaviour. A micromechanical model gave an insight into the switching systems operating in the crystal during the polarization rotation test. Domain structure in BT was mapped using synchrotron X-ray reflection topography. By making use of the angular separation of the diffracted reflections and specimen rocking, different domain types could be unambiguously identified, along with the relative tilts between adjacent domains. Fine needle domains (width ≈ 10μm) were successfully mapped providing a composite topograph directly comparable with optical micrograph. The domain structure was confirmed using other techniques such as piezoresponse force microscopy and atomic force microscopy/scanning electron microscopy and optical observations on the etched crystal. Results show that combined use of multiple techniques is necessary to gain a consistent interpretation of the microstructure. Finally, domain evolution in BT under compressive mechanical loading was observed in-situ using optical and X-ray diffraction techniques providing a series of images that show ferroelastic transition. The domain configurations influence the switching behaviour and constitutive models that can account for such effects need to be developed. Quantitative and qualitative data presented in this thesis can assist model development and validation.
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:558470 |
Date | January 2011 |
Creators | Potnis, Prashant |
Contributors | Huber, John |
Publisher | University of Oxford |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | http://ora.ox.ac.uk/objects/uuid:96973376-8596-4fc9-9c53-c58379a766a5 |
Page generated in 0.0013 seconds