Return to search

Implementation of A Flyback Converter with Single-tage Power Factor Correction

This thesis mainly presents the design and
implementation of a flyback converter with single-stage power factor correction. In the beginning, we propose different power factor collection (PFC) techniques referring to the inductor current of converter under three kinds of operation modes. In the continuous mode, we adopt the nonlinear-carrier control (NLC). Then, in the discontinuous mode and boundary mode, voltage-follower control (VFC) and transition mode technique control (TM) are adopted respectively. As to the converter analysis, we derive and verify the results of a small-signal model and perform equivalent circuit analysis by state-space averaging method, loss-free resistor (LFR) model, averaging method for two-time-scale system (AM), and current injected equivalent circuit approach (CIECA). Results derived from the above-mentioned models are compared and verified to be accurate of the system model. Furthermore, the control function and element design are implemented by simulation. We perform a PI controller to achieve better power factor based on results of analysis of the time and frequency domains analysis. Finally, three sets of different hardware are fabricated and verified depending on measured result and theoretical simulation.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0802107-120843
Date02 August 2007
CreatorsCheng, Jiang-Jian
ContributorsJerome Chang, Geeng-Kwei Chang, I-Chih Kao, Tzuen-Lih Chern, Yung-Chun Wu
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0802107-120843
Rightswithheld, Copyright information available at source archive

Page generated in 0.0018 seconds