Return to search

A physical model of reservoir sediment bypassing

On average, one percent of reservoir storage capacity is lost annually to sediment deposition in reservoirs. Several methods for sediment removal do exist, but most are inefficient and costly in terms of money or water usage. One method known as siphoning has been shown to adequately remove sediment, but present knowledge is lacking to optimize this method for removal. Three relationships for sediment transport in a pipe were compared against data collected from a physical model resembling a reservoir siphoning system. None of the three accurately predicted the physical model results. However, some trends among the relationships were observed, indicating that with additional modification to the relationships, parameters could possibly be developed to design a prototype system.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/277052
Date January 1989
CreatorsCooke, Steve Maurice, 1959-
ContributorsLaursen, Emmett M.
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Thesis-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.002 seconds