Return to search

The effect of limited site investigations on the design and performance of pile foundations.

The research presented in this thesis focuses on the quantification of the effect of limited site investigations on the design and performance of pile foundations. Limited site investigation is one of the main causes of structural foundation failures. Over the last 30 years, most site investigations conducted for infrastructure projects have been dictated by minimum cost and time of completion, rather than meeting the need to appropriately characterise soil properties (Institution of Civil Engineers 1991; Jaksa et al. 2003). As a result, limited site investigations remain common, resulting in a higher risk of structural foundation failure, unforeseen additional construction, and/or repair costs. Also, limited site investigations can result in over-designing foundations, leading to increased and unnecessary cost (ASFE 1996). Based on the reliability examination method for site investigations introduced by Jaksa et al. (2003) and performed by Goldsworthy (2006), this research investigated the effect of limited site investigations on the design of pile foundations. This was achieved by generating three-dimensional random fields to obtain a virtual site consisting of soil properties at certain levels of variability, and by simulating various numbers of cone penetration tests (CPTs) and pile foundations on the generated site. Once the site and the CPTs were simulated, the cone tip resistance (qc) was profiled along the vertical and horizontal axes. The simulated qc profiles yielded by the CPTs were then used to compute axial pile load capacity termed the pile foundation design based on site investigations (SI). In parallel, the axial pile load capacity of the simulated pile foundation utilising the “true” cone tip resistance along the simulated pile was also determined. This is termed “the true” design, or the benchmark pile foundation design, and referred to as pile foundation design based on complete knowledge (CK). At the end of this process, the research compared the pile foundation designs based on SI and those based on CK. The reliability of the foundation design based on SI was analysed with a probabilistic approach, using the Monte Carlo technique. The results indicated that limited site investigations have a significant impact on the design of pile foundations. The results showed that minimum sampling efforts result in a high risk of over- or under-designing piles. More intensive sampling efforts, in contrast, led to a low risk of under- or over-design. The results also indicated that the levels of spatial variability of the soil are notable factors that affect the effectiveness of site investigations. These results will assist geotechnical engineers in planning a site investigation in a more rational manner with knowledge of the associated risks. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1375097 / Thesis (M.Eng.Sc.) - University of Adelaide, School of Civil, Environmental and Mining Engineering, 2009

Identiferoai:union.ndltd.org:ADTP/288513
Date January 2009
CreatorsArsyad, Ardy
Source SetsAustraliasian Digital Theses Program
Detected LanguageEnglish

Page generated in 0.0017 seconds