Return to search

Effect of Dimethyl Ether Mixing on Soot Size Distribution in Premixed Ethylene Flame

As a byproduct of incomplete combustion, soot attracts increasing attentions as extensive researches exploring serious health and environmental effects from soot particles. Soot emission reduction requires a comprehensive understanding of the mechanism for polycyclic aromatic hydrocarbons and of soot formation and aging processes. Therefore, advanced experimental techniques and numerical simulations have been conducted to investigate this procedure.

In order to investigate the effects of dimethyl ether (DME) mixing on soot particle size distribution functions (PSDFs), DME was mixed in premixed ethylene/oxygen/argon at flames at the equivalence ratio of 2.0 with a range of mixing ratio from 0% to 30% of the total carbon fed. Two series of atmospheric pressure flames were tested in which cold gas velocity was varied to obtain different flame temperatures.

The evolution of PSDFs along the centerline of the flame was determined by burner stabilized stagnation probe and scanning mobility particle sizer (SMPS) techniques, yielding the PSDFs for various separation distances above the burner surface. Meanwhile, the flame temperature profiles were carefully measured by a thermocouple and the comparison to that of simulated laminar premixed burner-stabilized stagnation flame was satisfactory. Additionally, to understand the chemical role of DME mixing in soot properties, characterization measurements were conducted on soot samples using thermo-gravimetric analysis (TGA) and elemental analysis (EA).

Results of the evolution of PSDFs and soot volume fraction showed that adding DME into ethylene flame could reduce soot yield significantly. The addition of DME led to the decrease of both the soot nucleation rate and the particle mass growth rate. To explain the possible mechanism for the observation, numerical simulations were performed. Although DME addition resulted in the slight increase of methyl radicals from pyrolysis, the decrease in acetylene and propargyl radicals inhibited the production of polycyclic aromatic hydrocarbons. At the same time, the addition of DME gave rise to the increase of the flame temperatures, which favored the production of OH radicals. The incremental concentration of OH radicals promoted the oxidation rate of soot particles. Additionally, soot samples from flames with higher DME mixing ratios showed higher O/C, H/C mass ratios and thus better oxidation characteristics.

In summary, the addition of DME reduces soot emission in two ways: on the one hand, it inhibits soot nucleation and mass/size growth, then the production of soot particles decreases; on the other hand, it promotes soot oxidation process by increasing the concentration of OH radicals and improving the oxidation behavior of the soot particles, then more particles are oxidized. Both of them are responsible for the reduction of soot emissions at the presence of DME.

Identiferoai:union.ndltd.org:kaust.edu.sa/oai:repository.kaust.edu.sa:10754/609188
Date21 April 2016
CreatorsLi, Zepeng
ContributorsRoberts, William L., Physical Science and Engineering (PSE) Division, Chung, Suk Ho, Sarathy, Mani
Source SetsKing Abdullah University of Science and Technology
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Rights2017-05-12, At the time of archiving, the student author of this thesis opted to temporarily restrict access to it. The full text of this thesis became available to the public after the expiration of the embargo on 2017-05-12.

Page generated in 0.002 seconds