This dissertation examines data transfers along the existing lines of cable TV. PLC equipment has been selected as the focus of this examination. The essay examines the question of Multicarrier modulation and focuses more specifically onto the problem of OFDM modulation, which is being used by the selected equipment. It further describes the process of integration of PLC equipment into the cable TV network, modifications of the CATV and the basic topology of the created data networks. The essay also offers a closer look onto a PLC modem and Head End from Corinex that have been used in the implementation of a data network in a selected rural settlement. The author has also raised the issue of the problems connected with cable wires connected with this particular type of data transfers and the solutions of some of the encountered problems. The characteristics of this network have then been measured during normal operation of the created network. Measurements have been carried out in order to determine the transfer speed on a physical and transfer level, the SNR of specific connections and the signal attenuation. The measurements have confirmed the suitability of the used PLC equipment for the purposes of data transfer along the cable TV lines as far as data speed and signal strength was concerned. A map of the particular cable TV lines and the PLC equipment has been included in the attachment.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218204 |
| Date | January 2009 |
| Creators | Lukáč, Michal |
| Contributors | Martinásek, Zdeněk, Stančík, Peter |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds