This master’s thesis deals with the measurement of the electrical soil resistivity. In the theoretical part there are described the methods by which the soil resistivity is measured – especially the Wenner’s method, which was used for the practical measurements. Then there is also described the one-layered and the two-layered model of this method. Furthermore, there is described the procedure for the measurement of soil resistivity using the OMICRON CPC 100 and PU 193 instruments used in the measurement. To verify the modeling of a two-layered soil model, the theoretical part of the thesis describes the soil modeling process using the program Ansys. As for the practical part of the thesis, the measurements were carried out in three localities: Brno – Královo Pole; Hrušovany nad Jevišovkou – Pravice; Hustopeče nad Bečvou – Vysoká. The measured values were processed using the Matlab’s graphical user interface (GUI) that was developed within this thesis. From these values, at least one two-layered soil model was created for each location and both meters – a total of 12 models were created. For these models, measurements were simulated in Ansys. The results of the simulations were then compared with the measured values. The aim of this thesis is to compare the measured data with the data obtained by the simulations and subsequently to describe the suitability / unsuitability of the substitution of the one-layered soil model for the two-layered one for given measurements.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:376955 |
| Date | January 2018 |
| Creators | Matyska, Stanislav |
| Contributors | Topolánek, David, Vyčítal, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds