abstract: The experience base of practitioners with expansive soils is largely devoid of directly measured soil suction. This historical lack of soil suction measurement represents an impediment to adoption of modern unsaturated soil engineering to problems of expansive soils. Most notably, soil suction-based analyses are paramount to proper design of foundations in expansive soils. Naturally, the best method to obtain design suction profiles is to perform an appropriate geotechnical investigation that involves soil moisture change-appropriate drilling depths, sampling intervals, and requisite laboratory testing, including suction measurement. However, as practitioners are slow to embrace changes in methodology, specifically regarding the adoption of even relatively simple suction measurement techniques, it has become imperative to develop a method by which the routine geotechnical procedures currently employed can be used to arrive at acceptable approximations of soil suction profiles.
Herein, a substitute, or surrogate, for soil suction is presented, such that the surrogate agrees with observed field soil suction patterns and provides estimates of soil suction that are acceptable for use in practice. Field investigations with extensive laboratory testing, including direct suction measurement, are used in development of the soil suction surrogate. This surrogate, a function of water content and routinely measured soil index properties, is then used in estimation of field expansive soil suction values. The suction surrogate, together with existing geotechnical engineering reports, is used to augment the limited existing database of field soil suction profiles. This augmented soil suction profile database is used in development of recommendations for design suction envelopes and design suction profiles. Using the suction surrogate, it is possible to proceed from the beginning to the end of the Suction-Oedometer soil heave/shrinkage analysis without directly measuring soil suction. The magnitude of suction surrogate-based heave estimates is essentially the same as heave estimates obtained using direct soil suction measurements.
The soil suction surrogate-based approach, which uses a complete-stress-state approach, considering both net normal stress and soil suction, is an intermediate step towards the adoption of unsaturated soil engineering in expansive soils analyses, wherein direct soil suction measurements are routinely made. / Dissertation/Thesis / Doctoral Dissertation Civil, Environmental and Sustainable Engineering 2019
| Identifer | oai:union.ndltd.org:asu.edu/item:53773 |
| Date | January 2019 |
| Contributors | Vann, Jeffry David (Author), Houston, Sandra (Advisor), Houston, William (Committee member), Zapata, Claudia (Committee member), Arizona State University (Publisher) |
| Source Sets | Arizona State University |
| Language | English |
| Detected Language | English |
| Type | Doctoral Dissertation |
| Format | 551 pages |
| Rights | http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0015 seconds