Return to search

Nanostructured Photocatalysis for Water Purification

The integration of photocatalytic advanced oxidation into solar disinfection is a robust method of improving the microbial and chemical quality of treated water. This study evaluates the performance of photocatalytic solar irradiated batch reactors through an analytical model that reduces treatment parameters by simplifying photoreactor geometry and relating performance to reactor configuration. Accompanying experiments compare the performance of titanium dioxide coated foams of varying pore size to suspended and fixed film configurations through degradation of organic dyes (acid orange 24 and methylene blue), Escherichia coli, and 1,4-dioxane. Results indicate that a catalyst immobilized on a foam support can match the performance of a suspension due to effective mass transport and association between analyte and foam. Additionally, the potential treatment capacity of solar photocatalysis was compared to conventional treatment methods. Results of this comparison stress the fundamental limitation of solar photocatalysis if visible light wavelengths are not harnessed.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/43101
Date05 December 2013
CreatorsLoeb, Stephanie
ContributorsHofmann, Ronald, Andrews, Susan
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Languageen_ca
Detected LanguageEnglish
TypeThesis

Page generated in 0.002 seconds