The purpose of thesis is to study the transient analysis of structural responses of solder joints under high-Speed impact. By using the experimental and simulation analysis. The experimental work can be divided into six parts, such as different impact speeds, different solder¡¦s components, different pad finishing, different UBM and Runner, and different thickness of PBO. From experiments, the variations of solder joint strength and mechanical properties were received and discussed and the failure mode.
The empirical results show that maximum impact force on solder joints decreases as the impact speed increasing. The solder joint strength becomes stronger with the solder adopting elements of Ni and Co. The strength of solder ball was reduced significantly after a reflow. The intermetallic compound strength reduces with solder ball adopting high content of Ag. In impact test, the resistance of UBM of TiAl is better than that of TiAlTi. The runner adopted with the element Pd can improve the IMC reliablility to reduce Mode I failure. However, the PBO thickness has little influence on IMC strength.
From the numerical results, in the consideration of strain rate on solder joint the mechanical properties of solder joint could be effectively investigated. According to the different IMC strength there will produce three failure modes of solder ball and the impact force becomes higher as the IMC strength setting higher. If the lower yield stress is considered in lower IMC strength, the impact force is not the highest of all, but the time duration is the highest of all.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0719107-230517 |
| Date | 19 July 2007 |
| Creators | Wang, Chang-chin |
| Contributors | Chen, Ming, Ming-Hwa R. Jen, Chang-Lin Yeh, Yi-Shao Lai |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0719107-230517 |
| Rights | withheld, Copyright information available at source archive |
Page generated in 0.002 seconds