Return to search

Bioconversion of sugarcane bagasse and soybean hulls for the production of a generic microbial feedstock

Lignocellulose, mostly from agricultural and forestry resources, is a potential renewable material for sustainable development of biorefineries. From previous studies, reducing sugar production through biological pretreatment involves two steps: solid-state fermentation (SSF) for delignification, followed by enzymatic hydrolysis by adding celluloytic enzymes (cellulase and xylanase etc.). In the process described in this thesis, the necessary enzymes are produced in-situ and the hydrolysis proceeds directly after the solid-state fermentation. Enzyme hydrolysis releases free amino nitrogen (FAN), reducing sugar and many other potential nutrients from the fermented materials. This method additionally avoids the need for removal of inhibitors compared with conventional chemical pretreatment processes. A range of solid-state fermentations were carried out to investigate the effect of washing procedure, particle size and nitrogen supplement on Trichoderma longibrachiatum growth. From these preliminary studies it was concluded that nitrogen supplementation is a crucial factor to improve significantly the fungi growth and production of feedstock using sugarcane bagasse as raw material. In order to evaluate the influence of environmental humidity on petri dish experiments, moist environments were investigated, with over 75% relative humidity to limit water evaporation from solid-state fermentation. The results showed that moist environments gave approximately 1.85 times the reducing sugar yield than dry environments. The process of simultaneous enzymatic hydrolysis of substrates and fungal autolysis were also studied. The degree of hydrolysis was affected by initial fermented solid to liquid ratio, temperature and pH range. The optimal conditions for subsequent hydrolysis of fermented solids were determined. The optimal solid to liquid ratio, 4% (w/w), temperature 50°C and pH 7 were established. The highest final reducing sugar, 8.9 g/L and FAN, 560 mg/L, were measured after 48 h. The fungal autolysis was identified by image analysis as well as by the consumption of nutrient and the release of free amino nitrogen and phosphorous. Solid state fermentation in a multi-layer tray bioreactor and a packed-bed bioreactor were also developed, with moist air supply for oxygen provision and heat removal. Fermented solids in the multi-layer bioreactor led to the highest subsequent hydrolysis yield on reducing sugar, FAN and Inorganic Phosphorous (IP), 222.85 mg/g, 11.56 mg/g and 19.9 mg/g, respectively. These series of fermentation experiments illustrate the feasibility for the application of consolidated bioprocessing, through simultaneous pretreatment and enzyme production as a more economic and environment-friendly process compared with those reported for chemical pretreatment followed by commercial enzyme process. A growth kinetic model regarding both growth and respiration is also proposed. Ethanol production was studied using the generic feedstock produced from sugarcane bagasse and soybean hulls. Total ethanol yield reached 0.31 mg g-1 (61.4% of theoretical yield) after 30 h of submerged fermentation. The result of subsequent fermentation has already shown the potential of the generic microbial feedstock to be used to produce varied products depending on the microorganism utilised.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:713552
Date January 2015
CreatorsChang, Chen-Wei
ContributorsWebb, Colin
PublisherUniversity of Manchester
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttps://www.research.manchester.ac.uk/portal/en/theses/bioconversion-of-sugarcane-bagasse-and-soybean-hulls-for-the-production-of-a-generic-microbial-feedstock(0144bdd8-5444-468d-9f0f-50613a79be67).html

Page generated in 0.0014 seconds