Return to search

INTEGRATION OF CONTROL SYSTEMS INTO INTERLOCKING MATERIALS

<p>  </p>
<p>Architectured materials offer engineers more options for choosing materials with their desired properties. Segmenting materials to create topological interlocking materials (TIMs) creates materials, which can deform in greater amounts without failure and absorb more strain energy. Previous research on TIMs has shown that the stiffness and reaction force of these materials can be directly controlled by controlling the boundary forces offered by the frame which constrains these materials.</p>
<p>The research presented in this paper investigated a TIM made into a 1-Dimension beam like structure called a lintel. This research investigated not only the mechanics of this structure, but also developed a method of directly controlling the reaction force at a given displacement using shape memory alloy (SMA) wires. These wires would actuate the boundary pieces used to constrain the system. These actuation wires coupled with force sensors imbedded into the lintel allowed a feedback control loop to be established, which would control the reaction force. The reaction force was then controlled to create a smart structure which could optimize the strain energy absorption under the constraint of a maximum allowable load, similar to cellular solids used in packaging and padding materials.</p>
<p>To develop this smart structure, four separate investigations occurred. The first was finite element analysis (FEA) performed to model the loading response of the lintel. This experiment demonstrated that the Mises Truss Model was effective at modelling the lintel. The second was an experimental validation of the FEA model performed in the first investigation. This experiment validated the Mises Truss Model for the lintel. The third investigation simulated the active lintel using computational software and the model of the lintel established in the first two investigations. This experiment demonstrated computationally the ability of SMA wires to control the reaction force as desired in an idealized case. The fourth and final investigation experimentally validated the ability to create and active lintel and created a functioning prototype. This demonstrated experimentally the ability of the active lintel to control reaction force as desired.</p>
<p>This project has demonstrated the viability to create smart structures using segmented materials, which in the future may be used in a variety of applications including robotics and adaptive structures in harsh environments. </p>

  1. 10.25394/pgs.20394387.v1
Identiferoai:union.ndltd.org:purdue.edu/oai:figshare.com:article/20394387
Date28 July 2022
CreatorsEthan West Guenther (13163403)
Source SetsPurdue University
Detected LanguageEnglish
TypeText, Thesis
RightsCC BY 4.0
Relationhttps://figshare.com/articles/thesis/INTEGRATION_OF_CONTROL_SYSTEMS_INTO_INTERLOCKING_MATERIALS/20394387

Page generated in 0.0027 seconds