In order to provide a realistic and challenging experimental test for active vibration control concepts applicable to large space structures, an experimental model is required that simulates the complicated dynamic characteristics of such structures. This study presents the design, theoretical analysis, and experimental testing of such a model - a large, flexible plane grillage, with an adjustable skew angle, free to rotate on knife edges.
The plane grillage model was shown, by theory and experiment, to have high modal density at low frequencies (twelve modes below 11 Hz). It was also demonstrated, by analogy with published results for a cantilevered skew plate, that the model would have a pair of closely spaced modes, with distinct mode shapes, at a particular skew angle. By using an ana1ogy with a simple rigid bar model, the pendulum mode of the plane grillage was shown to have a frequency that could be driven towards zero, thereby simulating a rigid body mode.
The theoretical analysis was conducted, for one skew angle, using MSC/NASTRAN, and included the effect of gravity. Experimental tests were conducted on the model, with the same skew angle, using frequency and transient response techniques. The theoretical and experimental results were compared, with good quantitative agreement for the natural frequencies (first ten modes within 10%), and reasonable qualitative agreement for the lower mode shapes. / M.S.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/106004 |
Date | January 1983 |
Creators | Masse, Michael Anthony |
Contributors | Aerospace Engineering |
Publisher | Virginia Polytechnic Institute and State University |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Thesis, Text |
Format | xii, 104 leaves, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 09640613 |
Page generated in 0.0023 seconds