A testing system MTS Tytron 250 with an original construction was bought at the Institute of Physics of Materials, AVCR v.v.i. The main aim of this diploma thesis was to obtain experiences with the controlling of the system and with its advantages and limitations. The tensile tests were performed on Al fibres with diameters of 125 micrometer, 180 micrometer a 500 micrometer, nylon fibres of 250 micrometer and 500 micrometer and tensile and cyclic tests on Al foil of 77 micrometer in thickness. It was found that the machine is suitable for testing of either subtle specimens with low loading forces or specimens with low stiffness as e.g. polymers or very long metallic or ceramic fibres. On the other side, the Tytrom system is not able to perform tests on specimens with a high stiffness and high loading forces. Material parameters were determined with a high reproducibility. Advantages and limitations of several types of subtle specimen's fixation into the grips were studied too.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228056 |
| Date | January 2008 |
| Creators | Štěrbáček, Jaroslav |
| Contributors | Liškutín, Petr, Kruml, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds