The aim of my diploma thesis was to assess possibilities of tracing and, consequently, identifying radionuclides in transported materials detected by detection frames on the protected area border of the nuclear power plant of Temelín, by means of the portable spectrometer Inspector 1000. To achieve this, I designed a series of measurements based on a simulated passage of a motor vehicle fitted with ionizining radiation sources of various activities at the designed points of measurement so that these measurements corresponded as close as possible to the actual passage of vehicles with large-sized loads. Recorded values were analysed and marginal activities for the particular measuring points were fixed. Computation correctness was then verified by another passage of the vehicle through the measuring device. Specified values of the marginal activities at the particular measuring points were, for comparison, consequently measured by the portable spectrometer Inspector 1000. Measurement results proved that the portable spectrometer Inspector 1000 can efficiently detect, identify and locate the sources of ionizing radiation causing the alarm level to be exceeded on a stable measuring device at the fixed measuring points, with a higher sensitivity than a stable measuring device. Conclusions of this diploma thesis will be given to the radiation protection unit of the nuclear power plant of Temelín as a basis for specification or even expansion of the methods of measuring ionizining radiation sources when transporting large-sized loads in the nuclear power plant, and their introduction into the monitoring programme.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:376601 |
| Date | January 2018 |
| Creators | PLAŇANSKÝ, Jiří |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds