Wood is a major construction material that is used in many contexts, and for different purposes. Serious problems may arise, however, when moisture related deformations as twist occur in wood used in different types of building structures, joinery and furniture. Twist can be explained to a great degree by the helical deviation of the grain angle in relation to the longitudinal direction of the log or the sawn board. Wood fibres form a spiral within the tree, and this is a natural occurrence that is named spiral grain. The wood fibres close to the pith in Norway spruce form a left-handed spiral. In most trees the grain angle turns over to be right-handed with time. Sawn timber that exhibits large grain angles lead to problems of shape stability and stiffness in finished constructions. In this thesis the spiral grain in Norway spruce (Picea abies (L.) Karst.) was stated as well as the effect on sawn timber. The material was based on sample trees from Sweden and Finland. Samples were taken in twenty-two stands at different heights in tree. From six stands studs were sawn and dried for measuring twist and other deformations. The spiral grain was measured with the method scribe test on 390 log discs taken at the top-end of the logs. Account was given concerning changes in grain angle from pith to bark, regarding both increasing annual ring numbers and distance from pith. The development of grain angle over tree age was utilized to study whether annual growth, size of tree, height in tree as well as silvicultural treatments affected spiral grain. Moreover, the relation between grain angle and distance to pith (in mm) was used to forecast twist in sawn timber. The left-handed grain angle was at its greatest between the fourth and eighth annual rings. Thereafter for most trees the grain angle turned from left-handed to right-handed in a linear fashion, in a manner that was unique for each individual tree. The pattern of spiral grain differed significantly between different stands, regarding change of inclination with increasing age or distance from pith. The culmination of the grain angle close to the pith occurred at somewhat higher age higher up in the trunk. The grain angle decreased faster in top logs than it did in the butt logs. The largest trees within a stand had a grain angle that turned to right in a slower way than smaller ones. The thinning strength and type of thinning regime also affected the character of spiral grain in the remaining trees in a stand. There was an indication that strong thinnings, where fast growing trees are retained, may lead to more individuals in a stand that exhibit high grain angles under bark. With knowledge of the size and direction of the grain angle under bark, and the diameter of the log, calculations can be made that show how twisted the sawn timber will be after drying. This can be used for deciding whether an individual log can profitably be sawn and processed further or not. The grain angle under bark can be used to remove trees showing the greatest degree of spiral grain already in the first thinning. Silvicultural methods aiming at even and dense Norway spruce stands, which normally is practised in Scandinavia, will probably result in timber with relatively low risk concerning large grain angle and subsequent risk for twist in sawn wood.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:vxu-538 |
| Date | January 2002 |
| Creators | Säll, Harald |
| Publisher | Växjö universitet, Institutionen för teknik och design, Växjö : Växjö University Press |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, monograph, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Acta Wexionensia, 1404-4307 ; 22/2002 |
Page generated in 0.002 seconds