The PhD thesis deals with the possibility of performing dynamic tensile tests. For this purpose, Split Hopkinson Pressure Bar Test (hereinafter SHPBT) is used. The basic construction of SHPBT device is designed to perform dynamic compression tests on materials (metals, plastics, and ceramics). The obtained results are deformation stress – strain and strain rate – strain dependences. SHPBT is capable of testing materials at high strain rates up to 10^2 – 10^3 s-1. It was created a special device for dynamic tensile tests of materials at high strain rates. The created device uses the basic construction of SHPBT. The special device is used for testing flat specimens with 2 mm thickness. It was recognized by the Industrial Property Office of the Czech Republic as a utility model with number 23703. The specimens used for dynamic tensile testing were made of austenitic stainless steel (WNr. 1.4301) with 2 mm thickness. The verification of created device was carried out by numerical simulation. The numerical simulation was performed by ANSYS LS – Dyna software.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234248 |
| Date | January 2014 |
| Creators | Dohnal, Ivo |
| Contributors | Forejt, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds