Spray cooling of hot surfaces is used in the metallurgical industry during continuous casting, hot rolling or heat treatment. The water is sprayed on the cooled surface by the nozzle which transforms the water stream to droplets. The spray cooling of hot surfaces can be characterized as forced convection with the presence of the boiling. This physically complicated process is influenced by many factors, such as impurities and contaminants in the water, water temperature, water flow rate, droplet size, droplet impact velocity, surface temperature, surface roughness or the presence of oxides (scales) on the cooled surface. The dominant factor that affects the heat transfer during the spray cooling is the water impingement density. Other factors have a smaller but also significant effect. This doctoral thesis deals with the influence of the water temperature, surface roughness and the presence of oxides on the intensity of the spray cooling. These factors are investigated by laboratory experiments in which the hot steel surface is spray cooled. Effect of the oxide layer is also investigated by the numerical simulation. The experimental results are theoretically explained and generalized using mathematical methods.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:239939 |
| Date | January 2016 |
| Creators | Chabičovský, Martin |
| Contributors | Čarnogurská, Mária, Hajduk, Daniel, Raudenský, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.2731 seconds