This master’s thesis presents a proposal for the technology of manufacturing sheet metal part, which is a part of a bicycle wall bracket. The component is made of steel sheet ČSN 11 325 with subsequent surface treatment by galvanizing. Due to the chosen method of manufacturing with a progressive stamping die, the research part is focused on the technology of shearing and bending. Technological calculations were performed for the most suitable production variant, on the basis of which a mechanical press ANDRITZ Metals with the designation KSTU 2000-20-4G-PSE was chosen. Furthermore, the design of the tool itself is presented, which is substantiated by drawing documentation. At the end of the work, a technical and economic evaluation of the produced series of 300 000 workpieces per year is calculated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417095 |
| Date | January 2020 |
| Creators | Sikora, Marek |
| Contributors | Císařová, Michaela, Peterková, Eva |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds