This master´s thesis deals with the design of the control circuits for digital potentiometers and their application in analog systems. Digital potentiometers are three-terminal resistors with an adjustable center connection. The digital potentiomneters enable to drive logic gates, LED drivers, LCD drivers, analog switches etc. Controlling of these mentioned devices is possible by the I2C 2- wire serial bus (invented by Philips). The digital potentiometers are used to control of the primary parameters like cut-off frequency and quality factor in the state variable filter and cut-off frequency in a passive filter. Both filters are simulated in PSpice and then compared with the measured results. Next parts of this master's thesis are a computer program and a exemplary protocol.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218032 |
| Date | January 2009 |
| Creators | Sedlář, Petr |
| Contributors | Petržela, Jiří, Šotner, Roman |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds