Calculations of fluvial flows are strongly influenced by geometry complexity and large overall uncertainty on every single measurable property, such as velocity and shear. Moreover, a considerable portion of the data obtained from computational simulations arose from two-dimensional, steady-state models. The present work states a different approach to perform computer-based simulations and analyze fluvial flows. For the first part, the suitability of OpenFOAM to be used as the main CFD solver to analyze fluvial flows is studied. Initially, two well documented channel configurations are computationally studied using OpenFOAM. Finally, these results are compared to the output obtained from one of the widely used quasi-3D CFD solvers used to perform studies about environmental hydraulics.
Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-1822 |
Date | 01 December 2010 |
Creators | Mateo Villanueva, Pedro Abdiel |
Publisher | DigitalCommons@USU |
Source Sets | Utah State University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | All Graduate Theses and Dissertations |
Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0171 seconds