Pellets from haylage, respectively hay were extruded in an extruder working with a high temperature according to the utility model CZ 21314 with different parameters. The researched parameters of extrusion with a constant time delay were a pressure extrusion and volatile solids. The highest production of methane (CH4) at a fermentation with the temperature 40 °C was monitored from the haylage with a content of the volatile solids 10,6 - 11 % by extrusion with the pressure 1,37 MPa. The highest production of CH4 at a fermentation with the temperature 50 °C was monitored from the haylage with a content of the volatile solids 13,5 - 16,7 % by extrusion with the pressure 1,37 - 1,66 MPa. A kontent of the volatile solids 11,5 % of haylage and extrusion with the pressure 1,35 ? 1,4 were estimated like optimum parameters for a fermentation with the temperature 40 - 50 °C with the highest production of CH4. For evaluation of the effectiveness of investment was used the metod of net present value (NPV). This method is the most commonly used and in most cases the most appropriate.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:155315 |
| Date | January 2013 |
| Creators | BRAUN, Petr |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.012 seconds