A massive castings defects are examined in this doctoral thesis, specialise in steels passing through peritectic transformation. There are typical types of defects at massive steel castings, as contrasted to „ordinary“ internal and surface ones. For massive steel castings are typical defects under feeders like conchoidal fractures, segregations, microporesities, reoxidation products. Combination of Al and Zr is an ordinary final deoxidation of EOP and LF steel for castings in ŽĎAS a.s. foundry. The aim of Al + Zr combination was to both deep deoxidation by Al (decrease of bubbles risk) and denitrification by Zr (decrease of conchoidal fractures). This theses refute premission mentioned above and verified persisting risk of defects under massive feeders, even though Al + Zr deoxidation is used. A final deoxidation by increased amount of Al was examinated, in combination with other deoxidation agents. Castings had 11 [cm] maximal modulus, and occurence of conchoidal fracture, reoxidation products and primary austenite grain size was evaluated. A selected optimal final deoxidations (Al, Al+Ti, Al+Zr) as a result from experiment described above, were evaluated on castings with 15 [cm] maximal modulus. The result of experiment is, that is not possible to repeatedly produce massive steel casting using EOP metallurgical equipment without defects under feeders, despite of deoxidation and pouring temperature optimalization. The defect indications look like conchoidal fracture, but there are microporesity and impurities instead. Finally, castings with maximal modulus 15 [cm] were produced using so called secondary metallurgy (LF, VD). Secondary metallurgy allowed to both significant decrease of sulfur and degassing of melted metal. Only this metallurgical procedure guarantees production of heavy steel castings without typical defects under massive feeders
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234191 |
| Date | January 2013 |
| Creators | Čech, Jan |
| Contributors | Elbel, Tomáš, Jelínek, Petr, Šenberger, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds