In this study, it was shown that improvements in the quality of continuously cast steel billets, similar to those which can be achieved by electromagnetic stirring (EMS) of the liquid pool during solidification, can be obtained if casting superheats can be consistently controlled at low levels. A lack of casting temperature control is not only detrimental to the quality of the cast product, but also to a shop's overall productivity. The important variables for temperature control in the ladle, tundish and mould were quantified and possible methods of controlling these variables were proposed. / The thermal state of the ladle lining is one of the major contributors to the variability in casting temperature. It was shown that by reducing energy losses from the refractory ladle lining, by way of incorporating an insulating refractory tile between the ladle shell and the safety lining and by using a ladle lid throughout the cycle of the ladle, temperature losses from the liquid steel can be substantially decreased. (Abstract shortened by UMI.)
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.61258 |
| Date | January 1988 |
| Creators | Grandillo, Angelo M. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Science (Department of Mining and Metallurgical Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 000717674, proquestno: AAIMM75868, Theses scanned by UMI/ProQuest. |
Page generated in 0.0016 seconds