Corrosion represents the single most frequent cause for product replacement or loss of product functionality with a 5% coat to the industrial revenue generation of any country in this dissertation the efficacy of using filled coatings as a protection coating are investigated. Fillers disrupt the polymer-substrate coating interfacial area and lead to poor adhesion. Conflicting benefits of increasing surface hardness and corrosion with long term durability through loss of adhesion to the substrate are investigated. The effects of filler type, filler concentration and exposure to harsh environments such as supercritical carbon dioxide on salt water corrosion are systematically investigated. The constants maintained in the design of experiments were the substrate, AISI-SAE 1018 steel substrate, and the corrosive fluid synthetic sea salt solution (4.2 wt%) and the polymer, Bismaleimide (BMI). Adhesion strength through pull-off, lap shear and shear peel tests were determined. Corrosion using Tafel plots and electrochemical impedance spectroscopy was conducted. Vickers hardness was used to determine mechanical strength of the coatings. SEM and optical microscopy were used to examine dispersion and coating integrity. A comparison of fillers such as alumina, silica, hexagonal boron nitride, and organophilic montmorillonite clay (OMMT) at different concentrations revealed OMMT to be most effective with the least decrease in adhesion from filler-substrate contact. Subsequently examining filler concentration, a 3 wt% OMMT was found to be most effective. A comparison of unmodified and modified BMI with 3 wt% OMMT exposed and not exposed to supercritical carbon dioxide showed that the BMI provided better corrosion protection; however, OMMT provided better wear, shear, and hardness performance.
Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc984141 |
Date | 05 1900 |
Creators | Al-Shenawa, Amaal |
Contributors | D'Souza, Nandika Anne, 1967-, Nasrazadani, Seifollah, 1956-, Choi, Tae-Youl, Shi, Sheldon, Scharf, Thomas W. |
Publisher | University of North Texas |
Source Sets | University of North Texas |
Language | English |
Detected Language | English |
Type | Thesis or Dissertation |
Format | xiii, 122 pages, Text |
Rights | Public, Al-Shenawa, Amaal, Copyright, Copyright is held by the author, unless otherwise noted. All rights Reserved. |
Page generated in 0.0027 seconds