The need to develop light-weight and high strength materials for car frames which improve fuel efficiency and provide increased passenger safety during dynamic events such as automobile crashes has been the focus of the steel and automobile industries for the past 30 years. In recent years, the development of high strength steels such as multi-phase TRIP (Transformation-Induced Plasticity)-aided steels have shown great promise due to their excellent combination of high strength and ductility. The savings in automobile weight is provided by the inherent strength of TRIP steels which allows for the use of thinner sections. The TRIP effect is characterized by the phenomenon known as strain-induced martensitic transformation (SIMT) which enhances the work hardenability of such steels as the austenite phase transforms to the much harder martensite phase during plastic straining. This results in a resistance to local necking which subsequently enhances the strength, ductility, and formability of such steels. However, various factors exist which affect the mechanical behaviour of TRIP steels. This study will aim, through the use of finite element models, to investigate the role and influence of each of these factors on the TRIP effect in type 304 austenitic and multi-phase TRIP steels. These factors include the rate at which the martensitic transformation proceeds, the state of stress to which the material is subjected to, the interaction between the surrounding matrix and embedded retained austenite islands in multi-phase TRIP steels, and the volume fraction and morphology of the retained austenite islands. Investigation of these factors will provide further insight on each of their contributions to the TRIP effect in order to exploit the potential benefits offered by these steels.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.99793 |
| Date | January 2006 |
| Creators | Sierra, Robinson. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Engineering (Department of Mechanical Engineering.) |
| Rights | © Robinson Sierra, 2006 |
| Relation | alephsysno: 002595391, proquestno: AAIMR32621, Theses scanned by UMI/ProQuest. |
Page generated in 0.0435 seconds