This paper describes the design of equipment for measuring the wettability of surfaces. Surface wettability is determined by analyzing the profile drops, in an image taken with a digital camera. After the equipment is required to automatically find and focus the analyzed drops, taking the image, measuring wettability and save the image analysis, including measurement results to a file for subsequent offline analysis and archiving. The proposed facility is designed as a three-axis manipulator. For the driving the axes are chosen stepper motors. A key factor in achieving the highest possible speed measurement is very smooth movement of the manipulator, which is achieved by controlling of motors in microstepping mode with very high resolution. Software entire system is designed in the NI LabVIEW development environment for image processing was used module NI Vision.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230935 |
| Date | January 2013 |
| Creators | Šubrt, Kamil |
| Contributors | Andrš, Ondřej, Houška, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds