The aim of this thesis is to develop a test facility in order to validate the safe separation of a store model from the aircraft model with the analysis of the acquired data. Different alternatives are considered in the conceptual design and a facility is selected which contains the rail constructed 5 meters above the ground. 300 meter test range is used to accelerate the aircraft model, attached to the carriage with solid rocket engines. The concept is to accelerate the carriage within the first 100 meters, to perform the separation
of the model at the desired velocity when the rocket engine is burned out, and in the last 100 meters, to decelerate the carriage in order to recover the models. After the parts of the carriage are designed with respect to the requirements of the separation and completing the similitude study of scaled models with the ratio of 1/8, separation tests are performed. These tests are constrained with 0.9 Mach due to the store and test aircraft limitations. Doppler radar is issued to measure the velocity and photogrammetry method is used to validate and analyze the separation and to obtain the vertical
trajectory of the store model. Measured trajectory of the store model is compared with the trajectory of the full scale store.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12608508/index.pdf |
| Date | 01 June 2007 |
| Creators | Ozyuksel, Alaettin Arda |
| Contributors | Balkan, Tuna |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0017 seconds