Since strain changes the interatomic spacing of matter and alters electron and phonon dispersion, an applied strain ϵ can modify the thermal conductivity κ of a material. This thesis shows how the strain induced by heteroepitaxy is a passive mechanism to change κ in a thin film and how the film thickness is key to the functional form of κ(ϵ). Molecular Dynamics simulations of the physical vapor deposition and epitaxial growth of ZnTe thin films provide insights into the role of interfacial strain on the thermal conductivity of a deposited film. ZnTe films grown on a lattice mismatched CdTe substrate exhibit ~6% in-plane biaxial tension and ~7% out-of-plane uniaxial compression. In the T=700 K to 1100 K temperature range, the conductivities of strained ZnTe layers that are 5 unit cells thick decrease by ~ 35%, a result that is relevant to thermoelectric devices since strain can also enhance charge mobility and increase their overall efficiency. The resulting understanding of dκ/dT shows that strain engineering can also be used to create a thermal rectifier in a material that is partly strained and partly relaxed, like at the junction of an axial nanowire heterostructure.
To better isolate the role of strain, the study is extended to free-standing ZnTe films with thicknesses between 116 Å to 1149 Å under the application of both uniform and biaxial strain between -3% to 3% at 300 K. Since the boundaries of the film are diffuse, κ becomes size dependent when the film thickness approaches the order of the mean free path of the phonons. As this thickness is decreased, the magnitude of κ decreases until boundary scattering dominates so that κ(ϵ) depends on v_g (ϵ). This conclusion is important as it can be generalized to other materials and potential functions; it suggests that if a film is thin enough for boundary scattering to dominate, then the behavior of κ(ϵ) can be predicted based on the bulk dispersion curve alone, which should greatly simplify strain-based device design. / Thesis / Doctor of Philosophy (PhD) / Since strain changes the interatomic spacing of matter and alters electron and phonon dispersion, an applied strain ϵ can modify the thermal conductivity κ of a material. This thesis shows how the strain induced by heteroepitaxy is a passive mechanism to change κ in a thin film and how the film thickness is key to the functional form of κ(ϵ). Molecular Dynamics simulations of the physical vapor deposition and epitaxial growth of ZnTe thin films provide insights into the role of interfacial strain on the thermal conductivity of a deposited film. The result is relevant to thermoelectric devices since strain can also enhance charge mobility and increase their overall efficiency. The resulting understanding of dκ/dT shows that strain engineering can also be used to create a thermal rectifier in a material that is partly strained and partly relaxed, like at the junction of an axial nanowire heterostructure.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/25123 |
| Date | January 2019 |
| Creators | Majdi, Tahereh |
| Contributors | Puri, Ishwar, Engineering Physics |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds