The strap assembly serves to fix the ventilation duct. The used material is a ferritic stainless steel 1.4510 (DIN 17041) of unusual thickness 1.27 mm. As a production method from possible variations with regard to the production run 120000 pcs a year was selected the technology of shearing and bending. On the basis of structural calculations the tools were designed and the equipment chosen. The work includes drawings of selected parts of tools and complete sets. The cutting takes place in a fully automated line, the bending is controlled by employee. Costs were counted by economic calculations CZK 8.12 per part.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230999 |
Date | January 2013 |
Creators | Furch, Michal |
Contributors | Polívka, Rudolf, Podaný, Kamil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds