Return to search

Metallurgical Influences on the Stress Corrosion Cracking of Rock Bolts

The influence of steel metallurgy on rock bolt SCC was studied using a series of commercial carbon and low-alloyed steels. The chemical composition, their mechanical properties and the microstructures of these steels varied considerably in order to gather information for the discussion of the metallurgical influences under Hydrogen Embrittlement (HE) and Stress Corrosion Cracking (SCC) conditions. In order to understand the metallurgical influences on Rock Bolt SCC, an evaluation was carried out to fifteen commercial steels. The experiments reproduced the Stress Corrosion Cracking condition at which commercial rock bolts had failed in Australians mines. Due to the selected materials, stress and electrolyte condition it is expected that Hydrogen Embrittlement (HE) will affect the steel failure. The approach was to use the Linearly Increasing Stress Test (LIST) and exposing the sample to a dilute pH 2.1-sulphate solution, in accordance with prior studies. Stress Corrosion Cracking was evaluated by analysing the decrease in tensile strength, loss of ductility and fractography observed using Scanning Electron Microscopy (SEM). The initial series of test to the fifteen steels were performed at the free corrosion potential (f.c.p.) vs. Ag/AgCl. From this initial test only five steels (AISI 1008, AISI 4140, AISI 4145H, pipeline X-65 and X-70) did not show Stress Corrosion Cracking features. These five steel were tested in accordance with the Linearly Increased Stress Test (LIST) in the dilute pH 2.1 sulphate solution at different electronegative applied potential to minimum value of -1500mV. The experimental procedure tried to reproduce the Stress Corrosion Cracking condition to identify the most aggressive condition the steel is able to support before failing due to Stress Corrosion Cracking to then compare the theory of SCC and HE in low carbon and low alloy steel with the obtained experimental results. The investigation compared the well-known theory of SCC and HE in low carbon and low alloy steel with the obtained experimental results. Surprisingly, the experimental result did not always agree with the theory.

Identiferoai:union.ndltd.org:ADTP/254080
CreatorsErnesto Villalba
Source SetsAustraliasian Digital Theses Program
Detected LanguageEnglish

Page generated in 0.002 seconds