The development of steam turbines is continuously moving forward and the aim is oftento develop configurations with higher power output. Siemens Industrial Turbomachinery AB is currently in the beginning of a development project which replaces a single turbine with two interconnected turbines with higher pressure and temperature of the steam than before. To ensure reliable quality and hold down costs is it an advantage to do most of the assembly before delivery to site.This thesis work at Linköping University has been written in collaboration with Siemens Industrial Turbomachinery AB, Finspång. The objective of this work is to investigate the possibility to mount two turbines and a gearbox on a turbine frame. Theframe will be used both for transportation and during operation.The thesis considerate analyses of the turbine layout and critical parameters that may affect a turbine frame. In addition was a frame concept developed and evaluated with respect to solid mechanics and alignment of the shaft arrangement.Our conclusion is that there are good possibilities to install the equipment on a frame and achieve demands due to solid mechanics and alignment of the shaft arrangement.We recommend Siemens Industrial Turbomachinery AB to carry on with the project and do further investigations of the natural frequency of the frame concept, compare financial advantages and disadvantages together with possibilities for transportation.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-72082 |
Date | January 2011 |
Creators | Lundberg, Anders, Jansson, Tobias |
Publisher | Linköpings universitet, Maskinkonstruktion, Linköpings universitet, Maskinkonstruktion |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.011 seconds