In the present work, the effect of variation in specimen orientation and heat treatment on the Stress Corrosion Cracking (SCC) susceptibility of 7050 aluminum alloy was investigated in 3,5% NaCl solution and under freely corroding conditions. For this purpose, Constant Extension Rate Tests (CERT) was performed on precracked Compact Tension (CT) specimens and the Direct Current Potential Drop technique was applied to measure the crack lengths. In addition to crack length versus time curves, the relationship between the crack growth rate and the stress intensity factor was determined. Fractographic analysis was utilized extensively to support the findings related with basic mechanisms of cracking.
The alloy was found to be in the most susceptible state in the SL orientation, in which the crack propagation direction is parallel to the rolling direction. The resistance to SCC is higher in the TS but at maximum in LT orientation where the loading direction is parallel to the rolling direction.
In the peak aging treatment, T651, alloy is susceptible to SCC in SL orientation. When the over aging treatment, T7651, is applied the resistance is increased and the two step over aging treatment, T73651, has resulted in an additional improvement in this orientation. On the other hand, the alloy showed higher resistance to SCC in TS and LT orientations in T651 condition compared to the T7651 and T73651 treatments. In these orientations, the alloy is less susceptible in T73651 condition than in T7651 treatment.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/12605220/index.pdf |
| Date | 01 August 2004 |
| Creators | Cevik, Gul |
| Contributors | Doruk, Mustafa |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.002 seconds