Return to search

Analysis of Ni and Fe-based Alloys for Turbine Seal Ring Applications

Metal sealing rings have been used widely in compressors, turbines and hydraulic devices. Such rings can extend out due to elasticity, and keep close contact with the valve wall, resulting in the formation of a functional seal under pressure. In this project, the failure of metal sealing rings is considered. Sealing component failure due to stress relaxation can threaten the safety of the whole steam turbine. The object of this study was to examine the stress relaxation response and corresponding changes in microstructure of metal sealing rings used in nuclear steam turbine under high temperature and applied stress. The two kinds of sealing ring samples were selected for GH4145 and GH2132.
In this paper, all samples were tested by accelerated simulation experiment. The test temperature was controlled at 400℃, 600℃, and 800℃. The 400℃ experiments lasted for 10, 20, 30 and 40 hours, while the 600℃ and 800℃ experiments lasted for 5, 10, 15 and 20 hours. The surface morphology was observed by metallographic analysis. It was found that the two kinds of sealing ring samples presented with a continuous development of grain coarsening and a decrease of the twins when time and test temperature were increased. The prolongation of time and increase of test temperature will drive the grain coarsening and reduce the twins faster. Many precipitates and inclusions were observed on the surface. The composition of precipitation was examined by scanning electron microscopy (SEM). It was further studied by testing samples with applied stress. The differences between the two tests and their influence on mechanical properties are discussed. The grain coarsening and twinning in the alloy will reduce the stress relaxation resistance of the material. Additionally, the precipitates and inclusions in the alloy may adversely affect the stress relaxation performance. Sealing rings using the nickel-based superalloys have stronger anti-stress relaxation performance than sealing rings made of iron-based superalloys.

Identiferoai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-8426
Date20 March 2018
CreatorsShe, Dawei
PublisherScholar Commons
Source SetsUniversity of South Flordia
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceGraduate Theses and Dissertations

Page generated in 0.0021 seconds