The aim of this thesis is the construction of a diagram of fracture strain for high strength steel OCHN3MFA and its application for the estimation of fracture toughness of this material. The first part of the thesis contains the necessary theoretical framework for numerical modelling of tensile tests of various specimens - smooth specimen, specimen with a notch and specimen with a circumferential crack, it describes the influence of triaxiality on the fracture of bodies and the possibilities of construction of the diagram of fracture strain. Subsequently, a numerical model of these specimens is created using the finite element method (FEM). A non-linear, elastoplastic calculation is performed. Fracture is identified by means of comparing the true stress versus the strain obtained from tests with the finite element analysis results. Stress–strain states of specimens at the moment of fracture are obtained from a numerical model. A diagram of fracture strain is constructed, and it is used to estimate the fracture toughness of a cracked body. Finally, a local approach, which uses the diagram of fracture strain, and a classical approach of fracture mechanics, especially the stress intensity factor, are compared.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443729 |
| Date | January 2021 |
| Creators | Dubravec, Kristián |
| Contributors | Majer, Zdeněk, Horníková, Jana |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds