<p>Vehicles that run on compressed natural gas and hydrogen are currently being developed to
reduce greenhouse gas emissions and smog. To meet the need for a safe, reliable fuel storage system, a low-cost, acoustic-ultrasonic system has been developed to detect damage in high-pressure storage cylinders made of Carbon Fiber Reinforced Polymers (CFRP). This structural health monitoring system could lead to lighter, lower cost cylinders, and improved safety in automotive applications that utilize hydrogen and natural gas.</p><p>Several Non-Deconstructive Evaluation (NDE) techniques were investigated in the course of this work, and low-cost piezo-film sensors were selected to monitor the cylinder. These sensors were integrated into the carbon fiber structure, resulting in a sensor network that can be used for real-time structural health monitoring of composite cylinders. The system was operated by exciting the piezo-film sensors with an impulse and then the corresponding structural response (or signature) was measured and analyzed. This was compared to a previously measured response and evaluated for changes which can indicate failures in the tank. The analysis reduces the changes in the structural response to a single damage coefficient, which can then be used for malfunction indication and decision making in an
automotive on-board microprocessor control system.</p><p>The technology can be deployed at a reasonable cost, and has been designed to accurately detect damage with little or no maintenance required. Thirty cylinders were used in a test matrix to examine all possible failure mechanisms of the tanks, including: fatigue, cuts and gouges, impact and delaminations, stress rupture, heat damage, and combinations of these damage mechanisms. The damage detection system was capable of detecting damage long
before a critical condition arose for all cases. However, further development and testing into
larger cylinder designs and testing is still required to develop a final commercial product.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-04042005-133006 |
| Date | 11 April 2005 |
| Creators | Lung, Bryan C. |
| Contributors | Sulatisky, Michael T., Schoenau, Greg J., Reeves, Malcolm J., Habibi, Saeid R., Fotouhi, Reza, Burton, Richard T. |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-04042005-133006/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0025 seconds